GRAPHITE TOUR AD GC Wood Shaft 4/5/6/7

TOUR AD GC Series: 4/5/6/7

Next-Generation Neutral Shaft Designed for Evolving Swings

This new era of neutral shafts incorporates advanced technology to adapt to changes in golfers' swings, physical abilities, and the high performance of club heads. It minimizes shaft twisting and compression during the swing, leading to a higher impact rate and ball speed for consistent, powerful distance.

Specifications:

GC-4

• Flex: R2, R1, S
• Weight: 47g, 49g, 49g
• Torque: 5.5° (all flexes)
• Tip Diameter/Parallel Length: 8.5mm / 75mm
• Butt Diameter: 15.30mm, 15.35mm, 15.40mm
• Kick Point: Mid

GC-5

• Flex: R2, R1, S, X
• Weight: 54g, 55g, 56g, 59g
• Torque: 4.5° (R2, R1, S), 4.4° (X)
• Tip Diameter/Parallel Length: 8.5mm / 75mm (all flexes)
• Butt Diameter: 15.30mm, 15.35mm, 15.35mm, 15.45mm
• Kick Point: Mid

GC-6

• Flex: SR, S, X, TX
• Weight: 64g, 65g, 67g, 70g
• Torque: 3.1° (all flexes)
• Tip Diameter/Parallel Length: 8.5mm / 75mm (all flexes)
• Butt Diameter: 15.25mm, 15.30mm, 15.35mm, 15.40mm
• Kick Point: Mid

GC-7

• Flex: S, X, TX
• Weight: 73g, 74g, 76g
• Torque: 2.7° (all flexes)
• Tip Diameter/Parallel Length: 8.5mm / 75mm
• Butt Diameter: 15.25mm, 15.30mm, 15.35mm
• Kick Point: Mid

Tip Diameter: The values provided are for the unpainted shafts.

Cutting Method: When using for a 1W (driver), generally no tip cutting is required. For use in fairway woods, ensure that the insertion length into the hosel plus any tip cutting does not exceed the parallel length at the shaft's tip for stiffness adjustments.

Caution: Inserting the shaft tip beyond the parallel length into the hosel, or sanding down the shaft tip past the painted surface for hosel insertion, may lead to shaft breakage.

Assembly Warning: Be cautious not to overtighten the shaft during club assembly, frequency measurement, or grip replacement, as this may cause the shaft to crack.

Specifications: Specifications may change without notice due to improvements or other reasons.

1GDPHK Sep 2024 Golf Shaft